挖机施工主要用于工程建设,如道路、桥梁、建筑物、养殖池塘、地下工程、紧急挖掘等,可以完成人力无法完成的任务提高工作效率,通常挖机施工中电线束要注意哪些问题呢?
加长臂挖掘机出租小编为您讲解吧。
Excavator construction is mainly used for engineering construction, such as roads, bridges, buildings, breeding ponds, underground works, emergency excavation, etc., which can complete tasks that cannot be completed by manpower and improve work efficiency. What problems should be paid attention to in the wire harness during excavator construction? Let the rental editor of lengthening arm excavator explain it to you.
1.接触不良
1. Poor contact
挖机施工接触不良是常见的故障例如插头和插座不能严格缝合,或者因插头变形导致接触面氧化或生锈造成接触不良故障。
Poor contact during excavator construction is a common fault. For example, the plug and socket cannot be sewn strictly, or the contact surface is oxidized or rusted due to the deformation of the plug.
2.连接器压接或针焊不良
2. Connector crimping or poor pin welding
如果连接部分因应力过大而分离,轻则接触不良,重则断开,因为连接器的引脚与压接端子或焊点接触,这对使用维护来说是一个很大的考验。
If the connecting part is separated due to excessive stress, it may be poor contact or disconnection, because the pin of the connector is in contact with the crimping terminal or solder joint, which is a great test for use and maintenance.
3.断线
3. Disconnection
在实际挖机施工中会发生很多事故便携式连接器被拔掉,或者连接线的相关部分被起重机吊起,即使有障碍物或重物,如果碰到导线的位置,会导致导线断裂甚压接部分剥落等异常情况。
In the actual excavator construction, many accidents will occur, such as the portable connector is unplugged, or the relevant part of the connecting line is lifted by the crane. Even if there are obstacles or heavy objects, if they touch the position of the wire, they will cause the wire to break or even the crimping part to peel off and other abnormal conditions.
4.水进入塞子
4. Water enters the plug
虽然大家都知道插头连接器基本都是防水防浸的,但是如果是高压水的话很难堵住,尤其是高压水直接喷到插头连接器里面,可能会导致插头连接器进水,由于连接器防水,高压水很难排出后果就是短路问题。
Although we all know that the plug connectors are basically waterproof, it is difficult to plug them with high-pressure water, especially if the high-pressure water is sprayed directly into the plug connector, which may cause water to enter the plug connector. Because the connector is waterproof, it is difficult to discharge the high-pressure water, and the consequence is short circuit.
5.油污
5. Oil pollution
挖机施工时间长需要注意换油加油的技巧,当然这也给石油污染带来隐患,如果油长时间插入塞子,将很容易形成油膜,油和水可以导电所以会出现接触不良等问题。
The long construction time of excavator requires attention to the skills of oil change and refueling. Of course, this also brings hidden dangers to oil pollution. If the oil is inserted into the plug for a long time, it will be easy to form an oil film. Oil and water can conduct electricity, so there will be problems such as poor contact.
If you want a smooth and better construction, you must know the basic operation of the excavator like the palm of your hand, and master the correct operation of loading, walking, rotating, leveling, slope repair and other operations. Newcomers who have a poor foundation should listen to the advice of the old master and learn the essence of their homework. Follow our website for more information http://www.dybocheng.com OK.