您好!欢迎来访东营市兴达土方工程有限公司!关于我们 | 联系我们 | 在线留言
服务热线
18678687777(来经理)
联系我们
联系人:来经理
联系电话:13793968666
地址:山东省东营市广饶县
新闻中心

介绍加长臂作业偏差怎么处理

日期:2018-03-23   来源:http://www.dybocheng.com
挖掘机厂家介绍加长臂作业偏差怎么处理,并且连结部分要符合挖掘机的连接尺寸,以配合挖掘机完成施工,加长臂使用时出现了偏差故障该怎么办呢?
The long arm excavator manufacturer introduces how to deal with the deviation of the long arm operation, and the connection part must conform to the excavator connection size, so as to cooperate with the excavator to complete the construction, and when the long arm is used, there is a deviation fault. What should we do?
1、先检查下挖掘机组合阀,拆卸限压阀上的两根油管,再用堵头堵住出油口,启动发动机,拉动有堵头组合阀的操作手柄,检测下油压是否正常。

1, check the combined valve of the long arm excavator first, remove the two oil pipes on the pressure limiting valve, then plug the oil outlet with plugs, start the engine, pull the operation handle with plug combination valve, and check whether the oil pressure is normal.

2、在拆除另一侧行走组合阀上的两根油管,再启动发动机,看看限压阀的两个油孔,是否有油液流出,如若没有,说明不是组合阀的故障。
2, remove two oil pipes on the other side of the combined valve, then start the engine to see if there are two oil holes in the pressure limiting valve and whether there is oil flowing out. If not, it is not the failure of the combination valve.
3、挖掘机厂家提示大家,这时检查下回转接头处油道,因为油道间容易发生串通,如果确定回转接头的油道有问题,需要及时更换。
3, the manufacturer with long arm excavator prompts you to check the oil line of the central rotary joint at this time, because the oil way is easy to collude. If we decide that there is something wrong with the oil passage of the rotary joint, we need to change it in time.
感谢大家在百忙之中关注公司发布的产品信息,如果你想要了解更多,可以来我们公司咨询。我们欢迎大家的光临,并与你的合作!
Thank you for paying attention to the product information issued by the company in the busy schedule. If you want to know more, you can come to our company for consultation. We welcome everyone's presence and cooperate with you!


【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】