长臂挖掘机

省时 省力 省财富

挖掘机铲斗是挖掘机在使用作业中，使用率为频繁的部位之一。同样铲斗也是磨损快的部件，需要经常对挖掘机的铲斗进行更换作业。下面加长臂挖掘机租赁厂家来讲讲挖掘机铲斗的更换及注意事项。

The bucket of excavator is one of the frequently used parts of excavator in operation. Similarly, the bucket is also a rapidly worn part, which requires frequent replacement of the excavator bucket. Next, the leasing manufacturer of the extended boom excavator will talk about the replacement of the excavator bucket and the precautions.

挖掘机铲斗更换及注意事项：

Replacement of excavator bucket and precautions:

更换铲斗肯定会用到锤子等工具，当重力敲击销轴时，金属屑很有可能飞入眼中，所以大家进行这种操作时，护目镜、安全帽和手套等护具一定要佩戴好。

Tools such as hammers will definitely be used to replace the bucket. When the pin shaft is struck by gravity, metal chips are likely to fly into the eyes. Therefore, goggles, helmets, gloves and other protective equipment must be worn properly when doing this operation.

有的销轴如果已经有生锈难以拆卸的情况，可能会需要更大力敲击，所以有必要提醒周围人员注意安全，铲斗拆卸下来后，一定要稳妥放置。

If some pins are rusty and difficult to remove, they may need to be knocked more vigorously, so it is necessary to remind people around to pay attention to safety. After the bucket is removed, it must be placed securely.

当拆卸销轴时，要特别注意不要站在铲斗的下面，不要把脚或身体的任何部位放在铲斗的下面。

When disassembling the pin shaft, pay special attention not to stand under the bucket, and do not put any part of your foot or body under the bucket.

当拆卸或安装销轴需要对正孔时，不要把手指放入销孔。当进行连接工作时，需要两个人互相配合，为安全起见要彼此弄清信号并仔细工作。

Do not put your finger into the pin hole when it is necessary to align the hole when removing or installing the pin shaft. When connecting, two people need to cooperate with each other. For the sake of safety, they should understand the signal and work carefully.

挖掘机铲斗更换步骤：

Replacement steps of excavator bucket:

把铲斗放在平坦的地面上。备注当拆卸销轴时，要把铲斗放在刚好与地面接触的位置。如果把铲斗重重地落到地面上，将会增加阻力，将不容易卸下销轴。

Place the bucket on a flat surface. Note: When disassembling the pin shaft, place the bucket just in contact with the ground. If the bucket is dropped heavily on the ground, the resistance will increase and it will be difficult to remove the pin.

注意卸下销轴以后，要确保销轴不被泥沙弄脏，轴套两端的密封不被损坏。

After removing the pin, ensure that the pin is not dirty by sediment and the seals at both ends of the sleeve are not damaged.

从斗杆与连杆的每个销轴的锁定螺栓上拆下双螺母，拆下螺栓，然后卸下斗杆销轴和连杆销轴并卸下铲斗。

Remove the double nuts from the locking bolts of each pin of the stick and link, remove the bolts, and then remove the stick pin and link pin and remove the bucket.

使斗杆与孔对正，连杆与孔对正，然后涂上润滑脂并安装销轴。

Align the stick with the hole and the connecting rod with the hole, then apply grease and install the pin shaft.

挖掘机铲斗更换是一项技术活，需要操作人员注意很多事项，才能在不损坏机器和损伤人员的情况下完成操作。更多相关事项就来我们网站http://www.dybocheng.com咨询了解吧！

The replacement of excavator bucket is a technical activity, which requires operators to pay attention to many matters, so as to complete the operation without damaging the machine and personnel. Come to our website for more information http://www.dybocheng.com Ask and understand!