您好!欢迎来访东营市兴达土方工程有限公司!关于我们 | 联系我们 | 在线留言
全国统一服务热线
18678687777(来经理)
联系我们
联系人:王经理
联系电话:18678687777
地址:山东省东营市广饶县
租赁动态

加长臂挖掘机关于故障的应急方法

日期:2022-07-01   来源:http://www.dybocheng.com
在挖掘机的驱动过程中,如果传动“跳块”,应及时停机(或继续运行),然后查找原因,排除故障。具体方法有:
During the driving process of the excavator, if the transmission "jumps", stop the machine in time (or continue to run), and then find the cause and eliminate the fault. The specific methods are:
有一个“跳出”希尔路,可以放置在位置或块Ⅰ块位置,低速度机器停机时间再次去顶部时,故障排除;如果减块不成功或出现另一个“跳块”,则应根据动作要点和关机要求停止斜坡,然后进行故障排除。
There is a "jump out" Hill Road, which can be placed in the position or block I position. When the shutdown time of the low-speed machine goes to the top again, the fault is eliminated; If the block reduction is unsuccessful or another "block skipping" occurs, stop the slope according to the action points and shutdown requirements, and then troubleshoot.
平路行驶时若出现“跳车”,可按正常停车点停车,查找原因,排除故障。在下坡行驶时如有“跳块”,请根据加块动作将其高速放置,或采取“抓块”(紧急停车)措施。
If there is a "jump" when driving on a flat road, you can stop at the normal stop to find out the cause and eliminate the fault. If there is a "jumping block" when driving downhill, please place it at high speed according to the action of adding blocks, or take measures of "grabbing blocks" (emergency stop).
加长臂挖掘机
开到坡底后停机检查,排除故障;如果“添加块”,“抓块”不成功或再次出现“跳块”(中性)这个时候,司机可以控制发动机转速在中间速度(以防止发动机),使用“刹车”的方法使机器滑动斜坡的底部,然后故障排除。
Stop the machine for inspection and troubleshooting after driving to the bottom of the slope; If "adding block", "grabbing block" is unsuccessful or "jumping block" (neutral) occurs again, the driver can control the engine speed at the middle speed (to prevent the engine), use the "braking" method to make the machine slide at the bottom of the slope, and then troubleshoot.
如果“添加块”,“抓块”不成功或“跳块”(这个时候它是中性的)再次发生,和下一个大斜坡的加长臂挖掘机(这个时候机器将很快速度斜率“潜水”)的底部,应该快速的下坡停止行动的主要观点和停止,然后扣除的错。
If "adding block", "grabbing block" is unsuccessful or "jumping block" (it is neutral at this time) occurs again, and the bottom of the lengthening arm excavator of the next large slope (at this time, the machine will quickly "dive") should quickly go down the slope to stop the main point of action and stop, and then deduct the error.
以上便是问题的相关解答内容了,如果您想获取更多相关信息,就来关注我们网站http://www.dybocheng.com吧!
The above is the relevant answer to the question. If you want to get more relevant information, please follow our website http://www.dybocheng.com Come on!


【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】