您好!欢迎来访东营市兴达土方工程有限公司!关于我们 | 联系我们 | 在线留言
服务热线
18678687777(来经理)
联系我们
联系人:来经理
联系电话:13793968666
地址:山东省东营市广饶县
租赁动态

加长臂挖掘机都有哪些种类?

日期:2018-12-28   来源:http://www.dybocheng.com
关于发掘机加长臂这款产品,关于许多挖友们来说并不陌生,咱们在很多的深坑基、市政、河道施工中都能够见到这款工程机械的应用,有了发掘机加长臂以后任何复杂的施工环境都不在话下,那么常见的发掘机加长臂终究有哪些类型呢?
As for the product of excavator elongated arm, many excavators are familiar with it. We can see the application of this construction machinery in many deep pit foundations, municipal works and river construction. With the elongated arm of excavator, any complex construction environment is not under discussion. What types of common excavator elongated arm are there after all?
1.两段式发掘机加长臂使用范围相对较大,可是他的首要功能也即是为了提升发掘半径,在清理河道,填海造地,地铁出入口开挖,人行地底地道,还有高速公路防护墙修整,一般住所运送一下水泥等等。
1. The two-stage excavator's elongated arm has a relatively wide range of uses, but its primary function is to raise the excavation radius, clean up rivers, reclaim land, excavate subway entrances and exits, pedestrian underpasses, repair the protective wall of expressway, transport cement in general residence and so on.
也有人用他前置破碎锤作用于房子拆迁的,不过比较风险。两段式加长臂一般10-26米区间改装比较多。
Others use his front hammer to act on the house demolition, but it is more risky. Generally, the two-stage elongated arm is more modified in the 10-26 metre range.
2.三段式发掘机加长臂:或许多段式加长臂,首要应用于高层建筑的拆迁,前置破碎锤或许液压钳。20-28米内使用者比较多。
2. Extended arm of three-stage excavator: Maybe multi-stage extended arm is mainly used in the demolition of high-rise buildings, and the front crushing hammer or hydraulic clamp. There are more users within 20-28 meters.
3.滑臂发掘机加长臂:首要为了回转半径很小,可是发掘深度要求很高的工况规划,一般会前置贝壳挖斗(贝形斗)。滑臂笔直发掘深度一般为10米,内弹性笔直发掘深度一般在26米以内。

3. Sliding arm excavator elongation arm: The main purpose is to plan the working condition with small turning radius, but high excavation depth, usually with a shell bucket (shell bucket) in front. The maximum depth of straight excavation with sliding arm is generally 10 meters, and the depth of straight excavation with internal elasticity is generally less than 26 meters.
4.打桩发掘机加长臂:大小臂平直,前置弯臂2.6米左右(首要是为了与振动锤连接是便与阀块和管路的安装)及震动锤,应用于修建公路铁路或许埋设管道的时分打拔钢板桩。
4. Pile Driving Excavator Extended Arm: The upper and lower arms are straight, the front elbow is about 2.6 meters (mainly for connecting with the vibration hammer to install valve blocks and pipelines) and the vibration hammer are used to pull out steel sheet piles when constructing highway, railway or burying pipelines.
5.抓木机、抓料机发掘机加长臂:更多的时分为了装卸火车或许轿车而规划,一般大臂7.6米,小臂5-6米.前置抓木器、抓钳器或许贝壳挖斗。
5. Grabber, grabber excavator elongation arm: more time for loading and unloading trains or cars and planning, general arm 7.6 meters, arm 5-6 meters. Pre-grabber, grabber or shell excavator.
以上信息是由我们加长臂挖掘机整理发布希望大家能够喜欢我们的网站是:http://www.dybocheng.com
The above information is organized and released by our extended arm excavator. I hope you will like our website: http://www.dybocheng.com!


【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】